PartnerPak+® for Windows - Update Features:

-          The 3.0.401 update is in effective 12/12/2008.

1. The out of square shape that is selected from the change shape button on the "Add Frame" in the graphics editor is now being displayed instead of reverting back to the rectangle.

2. When in decimal mode the dimensions while round to the nearest .03125" or .0625" depending on your dimension tolerance.

3. When building a Custom A2 door and selecting the hinging button under hardware an error box might have popped up.  It didn't have any affect on what was being selected but it is now gone.

4. We increased the size of the description box for the drop downs that display product codes with their descriptions.

5. If you added glass to a frame in add parts it was using the width for the qty. in the glass optimizer only.

6. When using the change metal system in the graphics editor, the glass chosen for the frameset would change back to the frameset glass defaults in the parameters is different.

7. Below is a list of parts that had the #22 finishes set to the same as the #29 group and should have been the same as the #40 group.

450VG006 451TVG001 451VG004 451VG026 450VG106

451SSG004 451SSG005 451SSG006 451SSG007 451SSG104

451SSG106 451SSG111 451TSSG006 451TSSG106 451TSSG111

451TSSG129 451TVG005 451TVG006 451TVG007 451TVG008

451TVG011 451TVG106 451TVG108 451TVG111 451TVG132

451TVG134 451VG001 451VG005 451VG006 451VG007

451VG008 451VG011 451VG104 451VG106 451VG108

451VG111 451VG130 451VG131 451VG132 451VG134

8. Kawneer added new parts and update pricing on others.

9. A per frame price is displayed on the general elevation report of the bid recap.

10. Increased the font on the sheet labels for the metal opt.  Use "New Sheet Labels".

11. You can now delete splice locations on a frame that is recalled.

12. After creating an Alt Bid the project will show up in the list without having to exit and then reenter the program.

13. Corrected the glass bite when using 162020 and 162021 from 0.5625 to 0.5.

14. The Submittal Wizard is now free of charge for all level 4 users.  All other levels can still access the submittal data on a fee per use basis.

15. Added the 12" bottom rail option when using custom doors.

16. Updated pricebook pages using the F3 key.

17. Corrected the optimizer from freezing up on certain frames that were built in the Metric mode.

18. While in the Metric mode, a change was made to split the DLOs equally if the frame size allows.

19.  Corrected pricing discrepancies between PartnerPak and the pricebook on a few parts from the A18 section.